Tool steel, carbon steel N10E shallow hardening PN-84/H-85020
Steel grade | Standard | Chemical composition (%) | |||||||||
C | Mn | Si | P | S | Cu | Cr | Ni | Mo | other | ||
N10E | PN | 0,951,04 | 0,150,30 | 0,150,30 | max 0,025 | max 0,025 | max 0,20 | max 0,15 | max 0,20 | - | - |
C 105 W1C105W1 1.1545 | DIN W.nr | 1,001,10 | 0,100,25 | 0,100,25 | max 0,025 | max 0,020 | - | - | - | - | - |
C105E2U | AFNOR | 0,951,09 | 0,100,40 | 0,100,30 | max 0,020 | max 0,020 | - | - | - | - | - |
T10AT00103 | GB/T | 0,951,04 | max 0,40 | max 0,35 | max 0,030 | max 0,020 | max 0,30 | max 0,25 | max 0,20 | - | - |
U10A-1U10A У10A | GOST | 0,951,09 | 0,17 0,28 | 0,17 0,33 | max 0,025 | max 0,018 | max 0,25 | max 0,20 | max 0,25 | - | - |
C105U | ISO | 1,00 1,10 | 0,100,40 | 0,100,30 | max 0,030 | max 0,030 | - | - | - | - | - |
Steel used for making working tools in not hard conditions: reamers, punches cutting boards, cutters, tile dimensions,
metal saws
Tool steel, carbon steel deep hardening the N10 PN-84/H-85020
Steel grade | Standard | Chemical composition (%) | |||||||||
C | Mn | Si | P | S | Cu | Cr | Ni | Mo | other | ||
N10 | PN | 0,951,04 | 0,150,35 | 0,150,35 | max 0,030 | max 0,030 | max 0,25 | max 0,20 | max 0,25 | - | - |
U10-3U10 У10 | GOST | 0,951,09 | 0,170,33 | 0,170,33 | max 0,030 | max 0,028 | max 0,25 | 0,200,40 | max 0,25 | - |
This steel has similar or the same usage as N10E steel, if higher quality is not required. With higher quality requirements
steel N10E is recommended to use.